Bonding Details

Connecting by masonry bonding

Typical masonry bonding for ACICO blocks. Standard dimensions 60 X 25 different thickness

Typical masonry bonding for ACICO partition wall blocks 60 x 50 x thickness

Typical masonry bonding for ACICO blocks height 25 cm with partition wall blocks height 50 cm

Connecting by steel plate

ACICO steel connection is a stainless steel plate in 30cm length and 1mm thickness. The width is 3cm having circular holes allowing glue to pass through it. Also, the holes facilitate fixing ACICO nails in blocks.

The ACICO connection is applied to connect ACICO blocks each 50cm height

Wall Bonding for Different Block Heights

ACICO blocks 25cm height with blocks zoom height

Two different methods are applicable for bonding ACICO blocks with conventional one with zoom 20cm height. 
a. By ACICO connection
Use stainless steel hollow plate with 1mm thickness in each 50cm height of ACICO blocks

b. By Angle
Use galvanized angle or bent the stainless steel ACICO connection in each 2nd layer of conventional blocks. Fix it in ACICO wall by two ACICO nails 100mm length

ACICO partition wall block 50cm height with blocks zoom height

Both methods can be applied as illustrated above

ACICO masonry with concrete skeleton

The joints between R.C. elements (columns, beams and slabs) and ACICO blocks should be tilled with cement mortar , all ACICO joints are filled with thin bed mortar (glue).
For the connection of ACICO masonry with concrete columns, a steel connection such as galvanized angle gracing connection must be applied in each horizontal course.

ERECT THE ACICO MASONRY BEFORE SHUTTER WORK FOR COLUMNS & BEAMS

Advantages

• Less shuttering
  
• Well Connection column-masonry (without steel sheets)
  
• Proper Contact between concrete beam & infill (without opened joints)
  

Bath Room Details